V-Cap ODAM Capacitors

V-Cap ODAM Reference Grade Capacitors for the ST-35 (made in USA). The four (.1uF @ 630V) coupling caps are V-Cap ODOM (Oil Damped Advanced Metalized) Audio capacitors. The bypass cap is a CDE (IC-2149) Radial Leaded Metallized Polyester Film (.22uF @ 630V) due to space restrictions.

Read all about these caps and see their reviews at V-Cap.com

$295.00

Dynakit (Dynaco) ST-35 Tube Amplifier inrush connectivity & rectifier board

A specially designed "connectivity board" which provides a nice and neat way to connect the power wiring, inrush current limiter and diodes. It does away with the antiquated and messy terminal lug strip.

$70.00

Belton Gold Contact 9 pin Black Tube Sockets

Two premium grade Gold Pin Sockets, Black Glassfiber filled PPS Insulating material. Superior heat resistance and shielding for the two driver tubes on the circuit boards. Gold plated contacts/pins for improved signal transfer and corrosion resistance. The best tube sockets you can get for the ST-35 driver tubes! 

$30.00

Belton Gold Contact 9 pin Chassis Mount Sockets

Four premium grade Gold Pin Black sockets. Superior heat resistance and shielding for the EL84 output tubes on the amplifier circuit boards. Gold plated pins for improved signal transfer and corrosion resistance. The best tube sockets you can get for the ST-35 output tubes!

$60.00

Banana Plug / Binding Post Terminals

Add binding post / banana jack capability for you speaker terminals. Be aware that due to the precut opening in the ST-35 chassis, there is only enough room for one positive and one negative post for each channel. Output can be wired for either 4 ohm or 8 ohm impedance, but not both. The unused wire is capped off under the chassis and can be swapped with  some basic soldering and about 30 minutes time. These are great quality output jacks.

$45.00

Spade Terminal to Banana Plug / Binding Post Adapters

(Sold only in quantities of 4) Add binding post / banana jack capability to you speaker terminals. These are super handy if you don't fancy the idea of connecting bare speaker wire directly to the screw down terminals. Makes connections much easier and a bit more reliable.

$12.00